Attendance ZKTecoNexakey QF-009

Download attendance data by USB pen drive

পেনড্রাইভ দিয়ে হাজিরার ডেটা নামাবেন কীভাবে?

1 min Beginner 6 steps
Verified on a real device by Ripon Islam on 19 Nov 2026 · tested on MB20-VL
Short answer

If your ZKTeco or Nexakey attendance machine cannot connect to the software, insert a FAT32 pen drive into the machine and open the USB menu. Download the attendance data first, then the user data. Then import the file into ZKTime or BioTime on your PC. This works even when the network is down.

Before you start

  • FAT32 pen drive (small capacity works best)
  • Machine admin access
  • PC with ZKTime or BioTime installed
  • About 10 minutes

Watch it done

Step by step

  1. 1

    Format the pen drive as FAT32

    Copy any files off the pen drive first. On a PC, right-click the drive, choose Format, and select FAT32. Many machines do not detect NTFS or very large drives, so a small, empty drive is the safest choice.

    You should see: The drive properties show FAT32 as the file system.

  2. 2

    Insert the pen drive and open the USB menu

    Plug the pen drive into the machine's USB port. Then go to Menu > USB Manager (or Data Mgt. > USB). Menu names vary by model and firmware.

    You should see: The USB menu opens with download and upload options.

  3. 3

    Download attendance data

    Choose Download > Attendance Data. Wait for the success message and do not pull out the pen drive while it is working.

    You should see: A "Download successful" message appears.

  4. 4

    Download user data

    Choose Download > User Data. This saves the employee records, so the software can match each punch to the right person.

    You should see: A "Download successful" message appears again.

  5. 5

    Import the file into the software

    Plug the pen drive into the PC. In ZKTime, use the USB import option. In BioTime, use the device data import. Select the file from the pen drive.

    You should see: The software confirms the records were imported.

  6. 6

    Check the attendance report

    Open the attendance report for the period you downloaded. Check a few employees you know were present.

    You should see: Their punches appear for the right dates and times.

Still not working? Match what you see

What you seeLikely causeGo to
Machine does not detect the driveDrive is NTFS or too large Step 1
No USB menu on the machineMenu name differs, or the model has no USB port Step 2
Some days are missingLogs were cleared earlier Step 3
Punches show but names are missingUser data was not downloaded Step 4
File not accepted by the softwareWrong file type or model Step 5

When to stop and call us

Call us if the USB port is loose or damaged. Do not force the drive in. Also call before choosing any delete option on the machine. Deleted logs cannot be downloaded later.

বাংলায় সংক্ষেপে

  1. পেনড্রাইভ কম্পিউটারে FAT32 ফরম্যাট করুন। আগে ভেতরের ফাইল সরিয়ে নিন।
  2. পেনড্রাইভ মেশিনে লাগিয়ে Menu > USB Manager (বা Data Mgt. > USB) খুলুন।
  3. Download > Attendance Data দিন। "Download successful" না আসা পর্যন্ত অপেক্ষা করুন।
  4. এরপর Download > User Data দিন।
  5. পেনড্রাইভ পিসিতে লাগিয়ে ZKTime বা BioTime-এ ফাইলটি ইমপোর্ট করুন।
  6. অ্যাটেনডেন্স রিপোর্ট খুলে হাজিরা ঠিকমতো এসেছে কিনা দেখুন।

Common questions

Does USB download delete data from the machine?

No. Downloading copies the data to the pen drive and leaves it on the machine, unless you choose a delete option.

Which pen drive format should I use?

Use FAT32. A small-capacity drive works best. NTFS or very large drives are often not detected.

Does USB download need internet or a LAN connection?

No. The data moves directly between the machine and the pen drive, so it works when the network or router is down.

Did this fix it?

Your answer helps us improve the guide.

Products in this guide