100% Genuine Original firmware
Warranty Official support
Nationwide Fast delivery
ZKTeco In Stock

ZKTeco ProID-20 RFID Exit Reader

4.5 · 1 review · Model: ProID-20
Core Summary
  • Multi-technology reader — reads several card formats
  • 90 × 90 × 16 mm square format for standard back boxes
  • Waterproof for outdoor and gate mounting
  • Wiegand output to any standard access panel
PRICE ON REQUEST

Dealer, project & government pricing

Quoted same day · prices exclude VAT

Single unit — installed price available
Outside office hours — we reply by 9:00 AM next working day
Authorized Distributor
Direct from ZKTeco
Installation Support
Trained engineers
Quote in 3 Hours
Business hours reply
20+ Yrs Expertise
Since 2006 · 6 branches
At A Glance

Key Specifications

90 × 90 mm
Square Format
16 mm
Depth
Multi-Tech
Card Support
IP65
Outdoor Rated
Wiegand
Panel Output
1 Year
Warranty
Specs & Details

Full Product Information

Last Updated: 14-09-2026

What Is the ZKTeco ProID20 Reader?

The ZKTeco ProID20 is a square-format waterproof Wiegand reader supporting multiple card technologies, supplied in Bangladesh by DigiMark Solution as the Authorized Distributor of ZKTeco.

A reader is not a controller. It captures a credential and passes it to an access control panel or terminal, which holds the user database and drives the lock. If you need a device that opens a door on its own, you need a standalone terminal instead. We say this plainly because ordering a reader expecting a working door is the most common mistake in this category.

Key features

  • Square format for standard back boxes — Where the ProID10 suits narrow mullions, the ProID20 mounts cleanly on a standard 86mm square back box — the common wall position beside a door. Same multi-technology reading, different mounting problem solved.
  • Multi-technology card support — Reads several card formats from one device, which is what lets a site migrate card technology gradually instead of replacing every credential at once.
  • Waterproof for exposed doors — Rated for outdoor mounting at gates and covered entrances.
  • Wiegand output to any standard panel — Compatible with ZKTeco inBio and C3 controllers and most third-party access panels.

Why buy from DigiMark Solution

DigiMark Solution is an Authorized Distributor of ZKTeco for Bangladesh. Every unit is officially imported with original firmware and manufacturer warranty, and RMA is handled locally by our own service desk rather than shipped abroad. Grey-market access hardware cannot be firmware-updated or warranty-serviced here — ours can.

How it works

The reader sits at the door and captures the credential. It sends the identifier to the controller over its communication interface (Wiegand output). The controller checks the identifier against its user database and access rules, then energises or releases the lock. Feedback — the LED and buzzer on the reader — reflects the controller's decision, not merely that a credential was read.

Where it is used

Corporate offices, garment factories, banks, hospitals, universities, government installations and defence facilities across Bangladesh. Stock is held across seven branches in Dhaka and Chattogram for same-day pickup.

Indicative Price range in Bangladesh

Price on request. Dealer, system-integrator, and project pricing differ. Send us your quantity and application, and we will quote the same day — WhatsApp +880 1979-234342

Buy Genuine from DigiMark Solution

DigiMark Solution has been Bangladesh's authorized ZKTeco distributor. Every ZKTeco ProID-20 RFID Exit Reader is 100% genuine with original firmware and official manufacturer warranty, backed by trained engineers for installation, configuration and RMA support nationwide. Bulk and corporate orders are welcome.

100% Original Firmware Official Manufacturer Warranty Expert Technical Support
SPECIFICATION ProID-20 ProID10BE
Brand ZKTeco ZKTeco
Model ProID20 ProID10
Product Type Square-format waterproof Wiegand reader supporting multiple card technologies Slim waterproof Wiegand reader supporting multiple card technologies
Verification Method RFID card RFID card
Card Frequency 125KHz (EM) Cards 125 kHz (EM-Marine)
Card Types Supported Multi-technology — several card formats supported. Multi-technology — the ProID series is designed to read several card formats
Read Range 5cm 3.5cm
Reading Time ≤ 300ms ≤ 300ms
Output Interface Wiegand 26bit or 34bit Adjustable Wiegand
Wiegand Format RS485 & Wiegand Adjustable / Configurable to 26-bit or 34-bit
Input Ports External LED Control / External Buzzer Control External LED Control and External Buzzer Control
Fingerprint Capacity Not applicable Not applicable
Card Capacity Not applicable — reader only Not applicable — reader only
Indicator Pulsing White Standby Light / Red and Green LEDs standby mode
Tamper Alarm Support Not supported
Power Supply 7 ~ 13V DC 7~13V DC
Operating Temperature -20 °C ~ 65 °C -20 °C ~ 65 °C
Operating Humidity 10% ~ 90% Relative Humidity Non-Condensing 10% ~ 90% Relative Humidity Non-Condensing
Attribute / FeatureSpecification Details
BrandZKTeco
ModelProID20
Product TypeSquare-format waterproof Wiegand reader supporting multiple card technologies
Verification MethodRFID card
Card Frequency125KHz (EM) Cards
Card Types SupportedMulti-technology — several card formats supported.
Read Range5cm
Reading Time≤ 300ms
Output InterfaceWiegand 26bit or 34bit Adjustable
Wiegand FormatRS485 & Wiegand
Input PortsExternal LED Control / External Buzzer Control
Fingerprint CapacityNot applicable
Card CapacityNot applicable — reader only
IndicatorPulsing White Standby Light / Red and Green LEDs
Tamper AlarmSupport
Power Supply7 ~ 13V DC
Operating Temperature-20 °C ~ 65 °C
Operating Humidity10% ~ 90% Relative Humidity Non-Condensing
Complete Installation

What else you need for a working Kit

A single device is only part of a complete security or automation setup. Most projects need matching accessories, software and power components, chosen according to your site and requirements. You can start with a basic use case and upgrade later by adding the recommended supporting devices.

Want the complete door kit quoted? Tell us the door type and quantity — we will price every part, not just the terminal.
Get Full Kit Quote

It is an RFID reader designed for access control systems and connects to compatible controllers through Wiegand output.

No. It is a Wiegand RFID reader and requires a compatible access control panel/controller.

It supports 125 kHz EM and 13.56 MHz card technologies, depending on the specific model.

The ProID-20 has a reading range of up to 5 cm, depending on the card type and installation environment.

Yes. It supports adjustable 26-bit or 34-bit Wiegand output for compatible access control panels.

Yes. It has an IP65-rated enclosure and is suitable for indoor and outdoor access-control applications.

Customer Feedback & Reviews


User Reviews
Where It Fits

Built for High-Traffic Environments

Banks & MFIs
Compliance-grade access
Factories / RMG
Shift attendance at scale.
Corporate
Visitor + door control.
Govt / Hospital
Secure audited entry.

Get today's price for the ZKTeco ProID-20 RFID Exit Reader

Tell us your query and whether you need the complete kit — our engineers will specify and quote the same day.

Get Support