This mixing amplifier is rated at 60W. 100V and 4-16 Ω speaker output are provided. There are 4 microphone inputs and 3 line inputs, FM, USB, and SD audio sources. Bass and treble controls and a master volume control are provided. This amplifier can be applied to different occasions, such as supermarkets, classrooms, etc. Extensive protection from short-circuit, overload, and high temp is ensured. The automatic cooling system ensures an extremely quiet sound system.
Digi-Mark Solution is an authorized partner of DSPPA in Bangladesh. You can buy the DSPPA MP1010UB 6 Zones Paging and Music Mixer Amplifier at the best dealer price from our Head Office (Dhaka, Motijheel), IDB branch, Multiplan branch, Uttara Branch, and Chittagong (Chattogram) showrooms. For the lowest dealer price and the best price, Contact Us at 01979-234342.
Buy Genuine from DigiMark Solution
DigiMark Solution has been Bangladesh's authorized DSPPA distributor. Every MP1010UB 6 Zones Paging and Music Mixer Amplifier is 100% genuine with original firmware and official manufacturer warranty, backed by trained engineers for installation, configuration and RMA support nationwide. Bulk and corporate orders are welcome.
100% Original Firmware Official Manufacturer Warranty Expert Technical Support
SPECIFICATION
MP1010UB 6 Zones
Output Regulation
Less than 3dB, from off-load to full load
Input sensitivity
Microphone : ≤3mV (unbalanced)
Frequency Response
80Hz-16kHz (±3dB)
Distortion
Less than 1% (at 1kHz, 1/3 rated output voltage)
Ratio of
Signal to Noise
MIC: more than 71dB
Tone
Bass: ±10dB(at 100Hz)
Protection
DC voltage; overload; short-circuit.
Mute
Input signals from MIC 1 override other input signals
Power Supply
AC 220V/50Hz
Outer Packing Size(mm)
(L×W×H)520×430×195
Unit Size (mm)
(L×W×H)418×338×88
Attribute / Feature
Specification Details
Output Regulation
Less than 3dB, from off-load to full load
Input sensitivity
Microphone : ≤3mV (unbalanced)
Frequency Response
80Hz-16kHz (±3dB)
Distortion
Less than 1% (at 1kHz, 1/3 rated output voltage)
Ratio of
Signal to Noise
MIC: more than 71dB
Tone
Bass: ±10dB(at 100Hz)
Protection
DC voltage; overload; short-circuit.
Mute
Input signals from MIC 1 override other input signals